| Customization: | Available |
|---|---|
| Type: | Concrete Cutting Machine |
| Shotcrete Type: | Wet |
|
Still deciding? Get samples of US$ 3150/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product features
1. Using dual inverters + PLC control
2. According to the changes of the load, to automatically adjust the walking speed, making the bead rope is always in the best working condition.
3. it can keep the wire tension constant during stone or concrete block cutting.
4. Extension of the front column, to improve the straightness of the block squaring.
5. Unique pulley guiding device, to maximize the utilization of the wire
6. Protection function: wire broken, overload and open phase protection
7. Easy to operate, there is no requirement for the power phase
8. Easy to move
Technical Parameters
| Model | ZL-22FATS | ZL-18FATS |
| Driving wheel Dia. | 500/550mm | 500/550mm |
| Motor power | 22KW | 18.5KW |
| Length of wire | 20-50 | 20-50 |
| Wire speed | 0-40m/s | 0-40m/s |
| Walking speed | 0-144m/h | |
| Waking motor power | 0.2KW | 0.2KW |
| Rail length | 1550mm | 1550mm |
| Rail width | 470mm | 470mm |
| RPM | 0-980r/min | 0-980r/min |
| Voltage | AC380±10% 50Hz 3phase | AC380±10% 50Hz 3phase |
| Working environment temperature | (-15ºC- +40ºC) | (-15ºC- +40ºC) |
| Total weight | 450kg | 420kg |
| Size | 2400*900*900mm | 2400*900*900mm |
| Parameters | Technical requirements | Filled by Supplier |
| power source type | electric or hydraulic | Electric |
| nominal power | from 10 to 25 kW | 22kw |
| System voltage | 3 phases, 400 ± 20 V, 50 Hz | 3 phases,380,50hz |
| maximum wire speed | Adjustable, at least 22m / s | 30m/s (double frequency converter) |
| wire holding capacity | not less than 9m (holding at least 9m length wire) | Yes |
| electrical resistance class | not less than IP 54 | IP56 |
| remote control unit (remote control) | wired or wireless | Yes |
| Wire protection | Must be | Yes |
| Water supply kit | Must be | Yes |
| Hydraulic hose kit (if applicable, i.e., electrohydraulic system) | must be | Its electric type,no need to use this kit |
| diamond cutting wire | It must be possible to cut reinforced concrete, the minimum length of each rope is at least 100 m. | Yes 11.5mm or 10.5mm beads diamter |
| kit for connecting wires | Hand (manual) press | yes |
| joints | yes | |
| pulleys to guide the wire | with holder/handle | Yes |
| Repair Kit | The kit must be approved by the manufacturer of the cable cutting system. | yes |
| Composition of the kit must ensure the operation of the wire-cutting system for 2 years, taking into account that within one year the wire-cutting system will operate for 1000 hours | Can ensure work 2000 hours | |
| The cutting system must comply with the 2006/42 / EC (Machinery Directive) and 2014/35 / EU (electrical safety) or equivalent | yes | |
| The guaranteed period of the supplied goods must be not less than 2 years from the date of signing the acceptance-transfer act. | 1-year guarantee or 2000 hours, as which come first |
|
| During the warranty period, the Supplier must repair or replace the goods or its parts that do not comply with the parameters specified in the operating or maintenance documentation. | Yes, Exclude damage to machine parts caused by intentional damage or operational errors. Consumables can be replaced free of charge during the warranty period |
|
| The goods supplied and the parts to be replaced during the warranty period must be new and not used. | yes |
Diamond Wire Saw for concrete cutting technincal parameters
Factory pictures :
){kind=link}